Automatic cable extrusion forming machine maintenance
Device name: automatic cable extrusion forming machine
Equipment failure: start low speed send jitter
Fault analysis: analysis of rubber material with effect of extrusion screw placed in the cylinder stirring, mixing, plasticizing and compression molding machine extrusion, and then move to the head direction, the cable shape finally from die extrusion, hot strip feeding after feeding the open rubber mixing machine preheating screw extruder, the latter feed the rubber thermal refining after. Rolling machine is mainly used for towel or wipe glue glue and adhesive material curtain canvas pressing, pressing and embossing napkin. The main parts of the calender roller roller number is, usually in more than 3. The rubber roller gap with certain temperature and plasticity of feeding counter rotating when subjected to strong extrusion and extension under the effect of frictional force, the formation of the desired product, the system is mainly used in inverter control system.
After the on-site inspection found that the Yaskawa inverter three-phase output imbalance leads to low speed, open to detect the inverter module is normal, main driving voltage output imbalance. Replacement of drive circuit components after the lifting of the fault.
Jia Hong Wei repair service hotline: 0755-28916839, 13640994287 Shaw