Maintenance of Okuma CNC servo driver motor

Jiahongwei maintains OKUMA Okuma CNC servo driver motor, OKUMA Okuma servo amplifier, servo power supply, control board, servo motor, and OKUMA server MIV14-3-V5

Common faults of CNC system: no display, phase loss, overcurrent, overvoltage, undervoltage, overheating, overload, grounding, parameter error, display or output, module damage, error reporting, etc; Jiahongwei has complete accessories, which are maintained by professional engineers. It has passed the test software with servo motor to ensure the maintenance quality.

Maintenance of Okuma CNC Okuma: MIV01, MIV02, MIV03, MIV04, MIV06, MIV08, MIV14, MIV15, MIV22, MIV45 controllers; maintenance of Okuma CNC Okuma U100, OSP20, OSP200, OSP300, OSP700D and other series; professional maintenance of Okuma servo drivers, servo motors, keyboards, controllers, encoders, etc. Jiahongwei can repair OKUMA Okuma digital control servo motor. The magnet explodes, the magnet falls off, it is stuck and does not rotate, the encoder is worn, the code disk/glass disk is worn and cracked, the motor is hot and hot, the motor has water ingress, the motor runs abnormally, the high speed operation makes a noise, the noise is loud, the brake fails, the brake pads are worn, the low speed normal high speed deviation, the high speed normal low speed deviation, the startup alarm, the startup trip, the overload, the over-voltage, the over-current, the failure to start Weak startup, running jitter, loss of excitation, displacement, running deviation, output imbalance, encoder alarm, encoder damage, inaccurate position, alarm as soon as power is on, trip as soon as power is on, driver server alarm code, burnt coil winding, aviation plug damage, wrong origin position, encoder debugging/zeroing, bearing replacement, bearing groove wear, rotor fracture, shaft fracture, gear groove wear, etc.

Jiahongwei maintenance service hotline: 0755-28916839, 13640994287 Mr. Xiao